GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2003 🢒 L200/LW200 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Rear Compartment Lid Release Switch Replacement

Removal Procedure
  1. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .

    2. Object Number: 896836 Size: SH
  2. Remove the retaining screw.
  3. Disconnect the electrical connector.
  4. Remove the deflector from the I/P.
  5. Remove the rear compartment lid switch from the deflector.

Installation Procedure
  1. Install the rear compartment lid switch to the deflector.

    2. Object Number: 896836 Size: SH
  2. Connect the electrical connector.
  3. Install the deflector to the I/P.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the retaining screw.

    5. Tighten
    Tighten the screw to 2 N·m (18 lb in)

  5. Install the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .