For 1990-2009 cars only
- Plug the motor/actuator into the harness and provide power until the motor/actuator stops in the vent position. If the motor does not operate when powered, then the motor is already in the vent position.
- If the sunroof window is in the closed position, remove the sunroof window. Refer to Sunroof Window Replacement .
- Verify that the sunroof guide mechanisms are fully forward and in the vent position.
- Install the sunroof motor/actuator. Refer to Sunroof Motor/Actuator Replacement .
- Install the sunroof window, if necessary. Refer to Sunroof Window Replacement .
- Cycle the sunroof to verify proper operation.
Important: Verify that both the sunroof motor and the sunroof guide mechanisms are in the vent position before you begin the synchronization procedure.
