| Table 1: | Scan Tool Only Content Theft Programming |
RKE Customer Programmable Content Theft Programming
To enter programming mode:
- Press the PANIC button on the transmitter 8-10 times in 5 seconds with the ignition ON.
- Within 3 seconds, select the mode by pressing LOCK, UNLOCK, or TRUNK button.
| • | Active -- The content theft system will only be armed by using the transmitter to lock the doors. |
| • | Passive -- The content theft system will arm 5 minutes after the ignition is OFF, all the doors and the trunk are closed. Any door open will reset 5 minute timer. |
| • | Disabled -- No content theft system activated. |
Press to Select Mode | Mode Selected | Description | Feedback |
|---|---|---|---|
Press UNLOCK | Disabled | Content theft system disabled | BCM chime once upon receipt of transmitter feedback |
Press LOCK | Active | Content theft system active upon RKE LOCK command and IGN OFF, all the doors and the trunk closed | BCM chime once upon receipt of transmitter feedback |
Press TRUNK | Passive | System will arm 5 minutes after the vehicle is secured | BCM chime once upon receipt of transmitter feedback |
Mode | Description | Feedback | Default State |
|---|---|---|---|
Pre-alarm 0 | Content theft system feedback before full alarm | Chirp horn for 10 seconds | Disabled |
Pre-alarm 1 | Content theft system feedback before full alarm | BCM chime for 10 seconds | Enabled |
Pre-alarm 2 | Content theft system feedback before full alarm | Silent | Disabled |
Pre-alarm 3 | Content theft system feedback before full alarm | No pre-alarm | Disabled |
Arming 1 | Content theft system status | RKE arming only | Enabled |
Arming 2 | Content theft system status | RKE and passive arming | Disabled |
Arming 3 | Content theft system status | Content theft system disabled | Disabled |
