Application | Specification | |
---|---|---|
Metric | English | |
Antilock Brake System (ABS) Sensor Bracket-to-Knuckle | 8 N·m | 71 lb in |
ABS Sensor-to-Bracket | 4 N·m | 35 lb in |
Caliper Mount Bracket-to-Knuckle | 95 N·m | 70 lb ft |
Control Arm-to-Frame | 90 N·m + 75-90 degrees | 66 lb ft + 75-90 degrees |
Exhaust Manifold Pipe Heat Shield Bolts (L81) | 8 N·m | 71 lb in |
Exhaust Manifold Pipe-to-Exhaust Manifold Nuts | 30 N·m | 22 lb ft |
Exhaust Manifold Pipe-to-Exhaust Pipe Bolts | 20 N·m | 15 lb ft |
Exhaust Manifold Pipe-to-Pipe Bolts | 20 N·m | 15 lb ft |
Exhaust Manifold Pipe-to-Resonator Bolts | 20 N·m | 15 lb ft |
Frame Assembly-to-Body Bolts | 90 N·m + 45-60 degrees | 66 lb ft + 45-60 degrees |
Front Rotor-to-Hub | 3.5 N·m | 27 lb in |
Front Strut-to-Body Upper Nut | 55 N·m | 41 lb ft |
Front Strut-to-Knuckle | ||
| 50 N·m | 37 lb ft |
| 100 N·m + 30-45 degrees | 73 lb ft + 30-45 degrees |
Front Transaxle Mount Through Bolt | 55 N·m | 41 lb ft |
Lower Control Arm-to-Steering Knuckle | 100 N·m | 74 lb ft |
O2 Sensor Clip-to-Underbody Attachment Nut | 4 N·m | 35 lb in |
Rear Transaxle Mount Through Bolt | 90 N·m | 66 lb ft |
Rear Transaxle Mount-to-Frame Bolts | 60 N·m | 44 lb ft |
Right Splash Shield-to-Body | 5 N·m | 44 lb in |
Spring Seat Nut-to-Front Strut Shaft | 55 N·m | 40 lb ft |
Stabilizer Bar Clamp-to-Frame Bolts | 20 N·m | 15 lb ft |
Stabilizer Bar Link-to Strut | 65 N·m | 48 lb ft |
Stabilizer Bar-to-Stabilizer Bar Link | 65 N·m | 48 lb ft |
Steering Gear Heat Shield-to-Frame | 4 N·m | 35 lb in |
Steering Gear-to-Frame | 45 N·m + 90 degrees | 35 lb ft + 90 degrees |
Suspension Support-to-Body Bolts | 90 N·m + 45-60 degrees | 66 lb ft + 45-60 degrees |
Tie Rod End Linkage Installer | 45 N·m | 33 lb ft |
Tie Rod End-to-Knuckle Nut | 60 N·m | 45 lb ft |
Wheel Bolts | ||
| 63 N·m | 46 lb ft |
| 125 N·m | 92 lb ft |