Removal Procedure
- Disable the SIR system. Refer to "Disabling SIR
System" in this service manual.
- Remove the automatic transaxle control assembly. Refer to "Automatic Transaxle
Control Assembly Removal" in this service manual.
- Using an electrical terminal pick, remove the solenoid electrical terminals
from the connector body.
- Using a 5/32 in. drill bit, drill out the rivet
attaching the solenoid to control assembly.
- Remove the shift lock control solenoid.
Installation Procedure
- Route the shift lock control solenoid wires through
the opening in the control assembly.
- Insert the wire terminals into the connector
body.
- Position the solenoid to control assembly and
install the solenoid pop rivet with a rivet gun.
- Install the automatic transaxle control assembly. Refer to
"Automatic Transaxle Control Assembly Installation" in this service manual.
- Enable the SIR system. Refer to "Enabling SIR System" in this service
manual.