Removal Procedure
- Remove the fasteners that attach the amplifier to the instrument panel (I/P)
beam.
- Slide the amplifier off of the clutch pedal bracket.
- Disconnect the electrical connector connectors from the amplifier.
- Remove the amplifier from the vehicle.
Installation Procedure
- Connect the electrical connector connectors to the amplifier.
- Slide the amplifier onto the clutch pedal bracket.
Notice: Refer to Fastener Notice in the Preface section.
- Position the amplifier to the I/P beam. Install the fasteners.
Tighten
Tighten the fasteners to 10 N·m (89 lb in).