GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2001 🢒 L300/LW300 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lid Replacement

Removal Procedure

    Object Number: 892408 Size: SH
  1. Open decklid.

    2. Object Number: 894237 Size: SH
  2. Unsnap drivers side wiring harness clip from decklid hinge.
  3. Disengage decklid wiring harness from rear shelf panel.

    4. Object Number: 892408 Size: SH
  4. If decklid is to be reinstalled, mark location of hinges relative to the decklid with a wax pencil or equivalent.
  5. Remove one bolt from each side of hinge.
  6. With aid of a helper to hold on to decklid, remove remaining two bolts from decklid hinges.
  7. If decklid is to be replaced, remove wire harness from decklid and reinstall wire harness in the same position on the new decklid.

Object Number: 894215 Size: MF

Installation Procedure

    Object Number: 892408 Size: SH
  1. With aid of a helper, position decklid into place to install.

    2. Object Number: 894237 Size: SH
  2. Snap drivers side wiring harness clip to decklid hinge.

    3. Object Number: 892408 Size: SH
  3. Install one bolt on each side of hinge and snug.
  4. Adjust decklid to previous marks made or align with surrounding panels.
  5. Install remaining two bolts to decklid hinges and tighten.

    6. Tighten
    Tighten the decklid-to-decklid hinge bolts to 10 N·m(89 lb in).


    Object Number: 894237 Size: SH
  6. Install decklid wiring harness to rear shelf panel.
  7. Close decklid.