Tools Required

1. Remove the lifters. Place the lifters sequentially in a rack so they can be installed in their original order, if being reused.



2. Use J 8062 and J 41774 to compress the valve springs.



3. Remove the valve stem keys (2).
4. Remove the cap (3) from the valve stem.
5. Remove the valve spring (4).
6. Remove the valve seal (5).
7. Remove the valve spring seat (6) from the cylinder head.
8. Remove the valves (7). Place the valves sequentially in a rack so they can be installed in their original order, if being reused.

Tools Required

1. Remove the lifters. Place the lifters sequentially in the rack so that they can be installed in their original order, if being reused.
2. Use the SA9124E and J 43963 to compress the valve springs.



3. Remove the valve stem keys.
4. Remove the cap from the valve stem.
5. Remove the valve spring.



6. Remove the valve seal using the SA9102E-A .
7. Remove the valve spring seat from the cylinder head.
8. Remove the valves. Place the valves sequentially in the rack so that they can be installed in their original order, if being reused.