For 1990-2009 cars only
Removal Procedure
- Pull the trim outward to release the Velcro®. Slide the trim forward in the vehicle.
- Remove the trim from the instrument panel (I/P).
- Remove the power window switches, if equipped. Refer to Front Side Door Window Switch Replacement in Doors.
- Remove the park brake boot over by inserting a flat-bladed tool between the boot and the console.
- Pull the park brake boot over the park brake assembly.
- Remove the cupholder assembly. Refer to Cupholder Replacement .
- Disconnect the console wiring harness from the main body harness located under the cupholder.
- Remove the shift lever boot. Refer to Transmission Control Lever Boot Replacement in Automatic Transaxle - 4T40-E/4T45-E.
- Move the front seats to forward most position and remove console rear fasteners.
- Remove the console front fasteners.
- Gently lift the console up and over the shifter.
Installation Procedure
- Position the console into the vehicle.
- Install the console front fasteners.
- Move the seats forward. Install the console rear fasteners.
- Install the shift lever boot. Refer to Transmission Control Lever Boot Replacement in Automatic Transaxle - 4T40-E/4T45-E.
- Connect the console wiring harness to the main body harness located under the front console tray.
- Install the cupholder assembly. Refer to Cupholder Replacement .
- Install the power window switch, if equipped. Refer to Front Side Door Window Switch Replacement in Doors.
- Snap the park brake boot into place.
- Install the console trim panels.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the fasteners to 2.5 N·m (22 lb in).
Tighten
Tighten the fasteners to 2.5 N·m (22 lb in).
