Removal Procedure
- Remove
the center high-mounted stop lamp cover by pulling down at the edges.
- Remove the bulbs, if required.
- Disconnect the electrical connector from the center high-mounted stop lamp.
- Remove the center high-mounted stop lamp by pulling down to release the
retainer tabs.
Installation Procedure
- Position the center high-mounted stop lamp to the roof reinforcement.
- Install the center high-mounted stop lamp by pressing into place until
fully seated.
- Connect the electrical connector to the high-mounted stop lamp.
- Install
new bulbs, if required.
- Position the cover tabs to the slots.
- Install the cover pressing into place until fully seated.