Tail Lamp Replacement Sedan

1. Open the rear compartment.
2. Pull back the side carpet to gain access to the tail lamp.
3. Remove the nuts from the tail lamp.
4. Gently pull the tail lamp housing straight back.
5. Disconnect the electrical connector from the tail lamp.

1. Connect the electrical connector to the tail lamp.
2. Position tail lamp to the quarter panel and push in until fully seated.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the nuts to the tail lamp.

Tighten
Tighten the nuts to 3.5 N·m (31 lb in).

4. Reposition the side carpet.
5. Close the rear compartment.