Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Interior Lights Schematics | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
2 | Do the reading lamps operate properly with the lamp switches? | Go to Step 7 | Go to Step 3 |
3 | Is only one reading lamp inoperative? | Go to Step 4 | Go to Step 5 |
4 |
Did you complete the repair? | Go to Step 11 | -- |
5 |
Was a condition found and corrected? | Go to Step 8 | Go to Step 6 |
6 | Test for an open in the inadvertent power control circuit between the reading lamp assembly and the body control module (BCM). Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Was a condition found and corrected? | Go to Step 11 | Go to Step 9 |
7 | Test for an open in the interior control circuit between the reading lamp assembly and the BCM. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Was a condition found and corrected? | Go to Step 11 | Go to Step 10 |
8 | Repair the open in the ground circuit for the reading lamp switch. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 11 | -- |
9 | Replace the reading lamp assembly. Did you complete the repair? | Go to Step 11 | -- |
10 | Replace the BCM. Refer to Control Module References in Computer/Integrating Systems for replacement, setup and programming. Did you complete the replacement? | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
