Removal Procedure
- Tape the roof panel in front of the sunroof opening using masking tape
- Cycle the sunroof window to the vent position.
- Slide the sunshade rearward.
- Remove the sunroof window screws (1) on both sides.
- Lift the sunroof window (3) up from the sunroof opening.
Installation Procedure
- Position the sunroof window (3) into the sunroof opening.
Ensure that the window trade mark points rearward.
- Install the sunroof window screws (1). Do not tighten the screws.
- Carefully close the sunroof window from the vent position to the full
closed position.
- Adjust the sunroof window. Refer to
Sunroof Window Height and Opening Fit Adjustment
.