GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 862575  Size: SH
  1. Remove the lock cylinder bezel from the steering column shroud by carefully prying with a thin-bladed screwdriver.

  2. Object Number: 870643  Size: SH
  3. Remove the upper steering column trim cover.
  4. Remove the 3 lower steering column trim cover from the steering column attachment screws.
  5. Remove the lower steering column trim cover.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 870643  Size: SH
  1. Install the steering column trim covers and attachment fasteners.
  2. Tighten
    Tighten the steering column trim cover attaching fasteners to 4 N·m (35 lb in).


    Object Number: 862575  Size: SH
  3. Install the ignition switch bezel.