GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2009 🢒 OUTLOOK- 2WD 🢒 Safety and Security 🢒 Supplemental Inflatable Restraints 🢒 Rear Side Door Trim Panel Replacement

Rear Side Door Trim Panel Replacement Traverse


Object Number: 1841809 Size: MF

Callout

Component Name

Preliminary Procedure

Remove the rear door upper extension trim panel. Refer to Upper Extension Trim Panel Replacement.

1

Rear Side Door Pull Handle Cover

Tip
Install the top portion of the pull handle cover first to ensure tabs are lined up and push the cover in firmly.

2

Rear Side Door Inside Handle Bezel Finish Cover

3

Rear Side Door Trim Panel Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
6 N·m (18 lb in)

4

Rear Side Door Locking Rod Knob Assembly

Procedure

  1. Ensure the locking rod is in the unlocked position.
  2. Use a flat-bladed tool to disengage the detent tab and then remove the knob by pulling upward.
  3. When re-installing, push the knob down until the detent tab touches the locking rod opening cover.
  4. Push the detent tab into the lock knob to locking rod.

5

Rear Side Door Trim Panel Retainer (Qty: 9)

6

Rear Side Door Trim Panel Assembly

Procedure

  1. Use a door trim pad removal tool, or equivalent, at each of the 9 retainer locations to aid in the removal of the trim panel.
  2. Disengage the door lock cable.
  3. Disconnect the electrical connector.

Rear Side Door Trim Panel Replacement Acadia/OUTLOOK


Object Number: 1841809 Size: MF

Callout

Component Name

Preliminary Procedure

Remove the rear door upper extension trim panel. Refer to Upper Extension Trim Panel Replacement.

1

Rear Side Door Pull Handle Cover

Tip
Install the top portion of the pull handle cover first to ensure tabs are lined up and push the cover in firmly.

2

Rear Side Door Inside Handle Bezel Finish Cover

3

Rear Side Door Trim Panel Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
6 N·m (18 lb in)

4

Rear Side Door Locking Rod Knob Assembly

Procedure

  1. Ensure the locking rod is in the unlocked position.
  2. Use a flat-bladed tool to disengage the detent tab and then remove the knob by pulling upward.
  3. When re-installing, push the knob down until the detent tab touches the locking rod opening cover.
  4. Push the detent tab into the lock knob to locking rod.

5

Rear Side Door Trim Panel Retainer (Qty: 9)

6

Rear Side Door Trim Panel Assembly

Procedure

  1. Use a door trim pad removal tool, or equivalent, at each of the 9 retainer locations to aid in the removal of the trim panel.
  2. Disengage the door lock cable.
  3. Disconnect the electrical connector.

Rear Side Door Trim Panel Replacement Enclave


Object Number: 1892446 Size: MF

Callout

Component Name

1

Rear Side Door Pull Handle Cover

2

Rear Side Door Inside Handle Bezel Finish Cover

3

Rear Side Door Trim Panel Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
6 N·m (18 lb in)

4

Rear Side Door Trim Panel Assembly

Procedure

  1. Use a door trim pad removal tool, or equivalent, at each of the 9 retainer locations to aid in the removal of the trim panel.
  2. Disengage the door lock cable.
  3. Disconnect the electrical connector.

5

Rear Side Door Trim Panel Retainer (Qty: 9)