Front Differential Bearing Cup
Notice: Support the back side of the torque converter housing while installing the bearing
cup. Install the bearing cup until it stops moving. Applying excessive pressure to the bearing cup once it is seated could cause damage to the torque converter housing casting.
Notice: Failure to apply the lubricant will cause damage to the bolt and nut
threads.
Tip
• | Tighten DT-47927-2 which is part of
DT-47927
until it fits snugly on the bearing cup. |
• | Adjust
J 45124
so it sits on the torque converter housing surface just beyond the bearing cup opening. |
• | Apply the extreme pressure lubricant
J 23444-A
to the puller bolt threads to prevent damage to the bolt threads during bearing cup removal. |
• | Hold the puller bridge bolt and turn the nut to remove the bearing cup. |
Special Tools
• | J 23444-A
Extreme Press Lubricant - 1/4 Ounce Tube |
|