1

Front Differential Transfer Drive Gear Support Seal

Tip
A NEW seal must be installed.

Special Tools

J-46624 Support Seal Installer

2

Small Chamfer Faces Up

Notice: To avoid damaging the seal, first place J 46624-1 with the small chamfer end facing up and leave in place for at least 60 seconds.

3

Large Chamfer Faces Up

Tip
Turn J 46624-1 which is part of J-46624 , over with the large chamfer end facing up for 60 seconds to ensure that the seal has been properly sized.

1

Front Differential Transfer Drive Gear Support Fluid Passage Tube Gasket

2

Fluid Passage Tube Assembly

3

Front Differential Transfer Drive Gear Fluid Passage Tube Bolt M6 x 15 (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten

12 N·m (106 lb in)

4

Front Differential Transfer Drive Gear Fluid Passage Tube Bolt M5 x 12 (Qty: 2)

Tighten

7 N·m (62 lb in)

1

Front Differential Transfer Drive Gear Support Seal

Caution: 

Tip
The fluid seal assembly must be staked in place using DT-49131 to ensure proper seal retention.

Special Tools

2

Front Differential Transfer Drive Gear Support Torque Converter Fluid Seal Assembly