Rocker Panel Rear Molding Replacement. Saturn OUTLOOK

For 1990-2009 cars only

Makes 🢒 Saturn 🢒 2007 🢒 OUTLOOK - AWD 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Rocker Panel Rear Molding Replacement

Callout	Component Name
Preliminary Procedure Remove the rear wheel and tire assembly. Refer to Tire and Wheel Removal and Installation . Open the rear door in order to remove the rocker panel rear molding.
1	Rear Rocker Panel Finish Panel Screw (Qty: 4) Notice: Refer to Fastener Notice in the Preface section. Tighten 1.5 N·m (13 lb in)
2	Rocker Panel Rear Molding Assembly Tip Release the 2 retainers and the weatherstrip from the back side of the molding and remove.

Callout

Component Name

Remove the rear wheel and tire assembly. Refer to Tire and Wheel Removal and Installation .
Open the rear door in order to remove the rocker panel rear molding.

Rear Rocker Panel Finish Panel Screw (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.5 N·m (13 lb in)

Rocker Panel Rear Molding Assembly

Tip
Release the 2 retainers and the weatherstrip from the back side of the molding and remove.