Subject: | 6T70/6T75 Transmission -- Check Engine Light On, Poor Vehicle Performance, DTCs P1825 and P1915 Set (Diagnosis and Replace Control Solenoid Valve Assembly and/or Manual Shaft Detent Lever) |
Models: | 2008 Buick Enclave |
2007 GMC Acadia |
2007 Pontiac G6 |
2007 Saturn AURA, OUTLOOK |
with 6T70/6T75 Automatic Transmission (RPOs MH2, MH6, MY9) |
Some customers may comment on poor vehicle performance and the check engine light being illuminated. Upon investigation, the technician may find DTCs P1825 and P1915 set.
The cause of this condition may be due to poor wire welds on the internal mode switch or an internal short to voltage in the solenoid valve assembly.
View the internal mode switch signal readings on the Tech 2®. Compare with the normal readings (examples shown below). Perform the appropriate repair.
• | If the switch readings are low when they should be high, replace the internal mode switch (part of the manual shaft detent lever) and the control solenoid valve assembly (w/body & TCM). |
• | If the switch readings are high when they should be low, replace the internal mode switch (part of the manual shaft detent lever). |
| Signal A | Signal B | Signal C | Signal P |
---|---|---|---|---|
Park | Low | High | High | Low |
Reverse | Low | Low | High | High |
Neutral | High | Low | High | Low |
Drive | High | Low | Low | High |
M/Drive | Low | Low | Low | Low |
| Signal A | Signal B | Signal C | Signal P |
---|---|---|---|---|
Park | Low | Low | High | Low |
Reverse | Low | Low | High | High |
Neutral | Low | Low | High | Low |
Drive | Low | Low | Low | High |
M/Drive | Low | Low | Low | Low |
| Signal A | Signal B | Signal C | Signal P |
---|---|---|---|---|
Park | Low | High | High | Low |
Reverse | Low | Low | High | High |
Neutral | High | Low | High | High |
Drive | High | Low | High | Low |
M/Drive | Low | Low | Low | Low |
Part Number | Description |
---|---|
24240798 | Lever, Manual Shaft Detent |
24243095 | Valve Asm., Control Solenoid (w/Body & TCM) |
For vehicles repaired under warranty, use:
Labor Operation | Description | Labor Time |
---|---|---|
K7024 | Shaft Assembly, Manual Detent Lever - Replace | 2.4 hrs* (Acadia, Enclave, OUTLOOK) |
4.7 hrs* (AURA, G6) | ||
*This time is updated from the current Labor Time Guide. The next update of the Labor Time Guide will contain this change. Includes time to replace control solenoid valve assembly, if necessary. |