GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2007 🢒 OUTLOOK - AWD 🢒 Bulletins 🢒 Power Seat Track Moves/Loose Feeling (Chucking) (Replace Front Lift Link Bolt)

Power Seat Track Moves/Loose Feeling (Chucking) (Replace Front Lift Link Bolt)

Subject:Power Seat Track Moves/Loose Feeling (Chucking) (Replace Front Lift Link Bolt)

Models:2008 Buick Enclave Built Prior to June 2007
2007 GMC Acadia
2007 Saturn OUTLOOK


This bulletin is being revised to correct model years and add a build date for the Enclave model. Please discard Corporate Bulletin Number 08-08-50-002 (Section 08 -- Body and Accessories).

Condition

Some customers may comment that the power front seat track moves or has a loose feeling.

Cause

This condition may be caused by the shoulder of the bolt.

Correction

Replace the front lift link bolt. Follow the procedure below.


    Object Number: 2049788 Size: SH
  1. Measure from the floor to the bottom of the plastic seat front finish panel 79.4 mm (3 1/8 in). If not placed in this position, the seat link lift bolt cannot be removed.
  2. Remove the seat. Refer To Bucket Seat Replacement in SI.
  3. Remove the plastic seat trim. Refer to Front Seat Front Finish Panel Replacement in SI.
  4. Disengage the J channel retainers from all the sides of the seat cushion frame and lift up the cushion.

    5. Object Number: 2049786 Size: MF
  5. Remove the four bolts from the seat cushion pan and lift the pan upward.

    6. Object Number: 2049787 Size: MF
  6. Remove the front lift link bolt and discard.
  7. Install the new bolt and tighten.

    8. Tighten
    Tighten the bolt to 20 N·m (15 lb ft).

  8. Install the seat cushion pan and bolts.
  9. Install the seat cushion and cover.
  10. Install the J channel retainers to the seat cushion frame.
  11. Install the plastic seat trim. Refer to Front Seat Front Finish Panel Replacement in SI.
  12. Install the seat. Refer To Bucket Seat Replacement in SI.

Parts Information

IMPORTANT NOTE WHEN PRINTING THIS FORM: If the form prints out on two pages, make certain you fax BOTH pages so that the WPC receives all the needed information. Missing information will delay or prevent the part from being shipped.

Parts Request Form - Warranty Parts Center

To: Warranty Parts Center

 

e-mail: warrantypartscenterUSA@gm.com

 

or WPC Fax: 248-371-0192

 

Attn: Jeanette Dunn

 

Part Being Requested: Bolt WPC # 425

 

Dealer BAC (U.S.) / Dealer Code (Canada):

 

Dealer Name:

 

Dealer Address:

 

 

Dealer Contact Person:

 

Dealer Phone Number:

 

Repair Order Number:

 

Vehicle VIN:

 

Important: If you do not receive the part within 2 business days after e-mailing or faxing your part request to the Warranty Parts Center, please call Customer Assistance at 248-371-9901/9902.

IMPORTANT NOTE WHEN PRINTING THIS FORM: If the form prints out on two pages, make certain you fax BOTH pages so that the WPC receives all the needed information. Missing information will delay or prevent the part from being shipped.

Warranty Information

For vehicles repaired under warranty, use:

Labor Operation

Description

Labor Time

C6871

Cover And / or Pad, Front Seat Cushion-Left - R&R Or Replace

Use Published Labor Operation Time