Instrument Cluster Replacement. Saturn OUTLOOK

For 1990-2009 cars only

Makes 🢒 Saturn 🢒 2009 🢒 OUTLOOK - AWD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Instrument Cluster Replacement

Instrument Cluster Replacement Traverse

Callout	Component Name
Preliminary Procedure Remove the instrument panel cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Replacement.
1	Instrument Panel Cluster Trim Plate Spacer Screw (Qty: 4) Caution: Refer to Fastener Caution in the Preface section. Tighten 2.5 N·m (22 lb in)
2	Instrument Panel Cluster Trim Plate Spacer
3	Instrument Panel Cluster Assembly Screw (Qty: 2) Tighten 2.5 N·m (22 lb in)
4	Instrument Panel Cluster Assembly Procedure Disconnect the electrical connections. After replacing the instrument panel cluster, remove the instrument panel cluster fuse for a few seconds and then install the fuse. Refer to Control Module Referencesfor programming and setup information

Callout	Component Name
Preliminary Procedure Remove the instrument panel cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Replacement.
1	Instrument Panel Cluster Screw (Qty: 4) Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb in)
2	Instrument Panel Cluster Assembly Procedure Disconnect the electrical connector. After replacing the instrument panel cluster, remove the instrument panel cluster fuse for a few seconds and then install the fuse. Refer to Control Module References for programming and setup information.

Callout

Component Name

Remove the instrument panel cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Replacement.

Instrument Panel Cluster Screw (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

Instrument Panel Cluster Assembly

Procedure

Disconnect the electrical connector.
After replacing the instrument panel cluster, remove the instrument panel cluster fuse for a few seconds and then install the fuse.
Refer to Control Module References for programming and setup information.

Callout	Component Name
Preliminary Procedure Remove the instrument cluster trim plate assembly. Refer to Instrument Panel Cluster Trim Plate Replacement.
1	Instrument Cluster Screw (Qty: 4) Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb in)
2	Instrument Cluster Assembly Procedures Disconnect the electrical connections. After replacing the instrument panel cluster, remove the instrument panel cluster fuse for a few seconds and then install the fuse. Refer to Control Module References for programming and setup information.

Callout

Component Name

Remove the instrument cluster trim plate assembly. Refer to Instrument Panel Cluster Trim Plate Replacement.

Instrument Cluster Screw (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

Instrument Cluster Assembly

Disconnect the electrical connections.
After replacing the instrument panel cluster, remove the instrument panel cluster fuse for a few seconds and then install the fuse.
Refer to Control Module References for programming and setup information.

Callout	Component Name
Preliminary Procedure Remove the instrument cluster trim plate applique. Refer to Instrument Panel Cluster Trim Plate Applique Replacement.
1	Instrument Cluster Screw (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb in)
2	Instrument Cluster Assembly Procedure Disconnect the electrical connections. After replacing the instrument panel cluster, remove the instrument panel cluster fuse for a few seconds and then install the fuse. Refer to Control Module References for programming and setup information.

Callout

Component Name

Remove the instrument cluster trim plate applique. Refer to Instrument Panel Cluster Trim Plate Applique Replacement.

Instrument Cluster Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

Instrument Cluster Assembly

Disconnect the electrical connections.
After replacing the instrument panel cluster, remove the instrument panel cluster fuse for a few seconds and then install the fuse.
Refer to Control Module References for programming and setup information.