1

Front Seat Belt Anchor Finish Cover

2

Front Seat Adjuster Switch Mounting Plate

Procedure

1. Using a non-metallic flat-bladed tool, release the retainer tabs starting at the rear edge and working forward while pulling outward on the mounting plate.
2. Disconnect the electrical connectors from the switch assemblies.

3

Front Seat Outer Recliner Finish Cover Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
3 N·m (27 lb in)

4

Front Seat Outer Recliner Finish Cover