Preliminary Procedures

1. Remove the windshield garnish moldings. Refer to Windshield Garnish Molding Replacement - Left Side and Windshield Garnish Molding Replacement - Right Side.
2. Remove the sunshade anchor. Refer to Sunshade Anchor Replacement.

1

Sunshade Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
3 N·m (25 lb in)

2

Sunshade Assembly

Procedure

1. Lower the front of the headliner enough to gain access to the sunshade electrical connector which is glued to the headliner.
2. Disconnect the sunshade electrical connector.