ABS Indicator Always On. Saturn OUTLOOK

For 1990-2009 cars only

Makes 🢒 Saturn 🢒 2007 🢒 OUTLOOK - FWD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 ABS Indicator Always On

Diagnostic Instructions

•	Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure.

•	Review Strategy Based Diagnosis for an overview of the diagnostic approach.

•	Diagnostic Procedure Instructions provides an overview of each diagnostic category.

The instrument panel cluster (IPC) illuminates the Antilock Brake System (ABS) indicator by supplying ground to the lamp. The electronic brake control module (EBCM) sends a serial data messages to the IPC, in order to command the indicator ON or OFF.

Reference Information

Schematic Reference

Antilock Brake System Schematics

Connector End View Reference

•	Antilock Brake System Connector End Views

•	Displays and Gages Connector End Views

Electrical Information Reference

•	Circuit Testing

•	Connector Repairs

•	Testing for Intermittent Conditions and Poor Connections

•	Wiring Repairs

Scan Tool Reference

Scan Tool Data List

Circuit Verification

Ignition ON, observe the ABS indicator to turn ON then OFF during the IPC bulb test.

Circuit/System Testing

Important: Diagnose all vehicle DTCs before using this diagnostic.

Ignition On, perform the display test with a scan tool, verify the ABS indicator turns On then OFF.

⇒	If the ABS warning lamp does not turn OFF, replace the IPC.

Replace the EBCM.

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure.

Control Module References for EBCM or IPC replacement, setup, and programming