Preliminary Procedures

1. Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement .
2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
3. Rear the rear door energy absorber pad. Rear Door Energy Absorber Pad Replacement .

1

Rear Side Door Lock Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Procedure

Remove the rear lower section of the run channel only.

Tighten
10 N·m (89 lb in)

2

Rear Side Door Lock Assembly

Procedure

1. Release the inside handle cable retainers before removing the door lock.
2. Disconnect the door lock electrical connector.
3. Transfer the lock rods.