Preliminary Procedures

1. Remove the rear liftgate interior trim panel. Refer to Liftgate Trim Panel Replacement .
2. Remove the rear wiper arm assembly. Refer to Rear Window Wiper Arm Replacement .
3. Disconnect the electrical connector.

1

Rear Window Wiper Arm Nut

Notice: Refer to Fastener Notice in the Preface section.

Tighten
19 N·m (14 lb ft)

2

Rear Window Wiper Pivot Shaft Gasket

Procedure

Align the tab on the gasket to the slot on the rear wiper motor upon assembly.

3

Rear Window Wiper Motor Bolt (Qty: 2)

Tighten
10 N·m (89 lb in)

4

Rear Window Wiper Motor Assembly