Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the wheel bearing/hub assembly. Refer to Front Wheel Bearing and Hub Replacement .
3. Remove the outer tie rod end from the steering knuckle. Refer to Steering Linkage Outer Tie Rod Replacement .
4. Separate the lower ball joint from the steering knuckle. Refer to Lower Control Arm Ball Joint Replacement .

1

Front Strut Suspension Nut (Qty: 2)

2

Front Strut Suspension Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Support the wheel drive shaft with mechanics wire after the knuckle has been removed.

Tighten
147 N·m (108 lb ft)

3

Steering Knuckle