Preliminary Procedure

Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .

1

Headlamp Assembly Bolt (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
6 N·m (53 lb in)

2

Headlamp Fascia Brace Fender Reinforcement Bolt

Tighten
6 N·m (53 lb in)

3

Headlamp Cam Adjuster

Procedure
Set the headlamp adjusters at the nominal setting of 6 turns off fully seated.

4

Headlamp Cam Locking Nut

5

Headlamp Assembly

Tip
Disconnect the electrical harness as the headlamp assembly is being removed from the vehicle.