Preliminary Procedure

Remove the park, and turn signal lamp bracket assembly. Refer to Parking and Turn Signal Lamp Bracket Replacement .

1

Front Fog Lamp Assembly Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2.0 N·m (18 lb in)

2

Front Fog Lamp Adjuster Screw

Tip
Count the reverse turns of the adjuster screw in order to have the same number of turns upon re-assembly.

Procedure

Aim the fog lamps after the park, and turn signal lamp bracket has been re-installed. Refer to Fog Lamp Aiming .

3

Front Fog Lamp Adjuster Screw Retainer

Tip
Ensure the retainer is fully seated into the park, and turn signal lamp bracket prior to installing the adjuster screw.

4

Front Fog Lamp Assembly

Caution: Refer to Halogen Bulb Caution in the Preface section.

Tip
Transfer the fog lamp bulb as needed.