Preliminary Procedure

Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .

1

Headlamp Assembly Bolts (Qty: 4)

Caution: The high intensity discharge system produces high voltage and current. In order to reduce the risk of severe shocks and burns, the battery negative cable must be disconnected any time service work is being performed on or around the high intensity discharge system.

Caution: The high intensity discharge system produces high voltage and current. To reduce the risk of severe shocks and burns:

Notice: Refer to Fastener Notice in the Preface section.

Tighten
6 N·m (53 lb in)

2

Fender Brace to Headlamp Screw

Tighten
6 N·m (53 lb in)

3

Headlamp Adjuster Nut

4

Headlamp Vertical Adjuster Bolt Bushing

5

Headlamp Capsule Assembly

Procedure
Disconnect the forward lamp harness electrical connector from the headlamp prior to removing the headlamp assembly from the vehicle.