Preliminary Procedure

Open the lift gate in order to access the tail lamp access hole covers.

1

Tail Lamp Access Hole Covers (Qty: 2)

Procedure
Use a small flat bladed tool in order to remove the covers.

2

Tail Lamp Screws (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
3 N·m (27 lb in)

3

Tail Lamp Wiring Harness Connector

Procedure
Disconnect the harness prior to removing the lamp assembly.

4

Tail Lamp Assembly

Tip
Transfer the turn signal and side marker lamp bulbs as needed.