Procedure

1. Remove both front wiper arm assemblies. Refer to Windshield Wiper Arm Replacement .
2. Remove the jump start battery ground terminal from the passenger side engine compartment at the lower edge of the air inlet grille panel.
3. Begin the air inlet panel installation with sequence number 1 to install the air inlet panel retainer to the upper plenum first.
4. Sequence numbers 2 and 3 are the rear retainers positioned to the bottom edge of the windshield.
5. Sequence numbers 4 and 5 are used for positioning the outer grille panel edge to the upper outer plenum.
6. Sequence 6, are the retainers that secure the front of the air inlet panel to the plenum.
7. Sequence 7, are the attachments to both the right and left side fenders and need to be secured last to the vehicle.

1

Air Inlet Grille Panel

2

Air Inlet Grille Panel Retainers (Qty: 9)