• | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
• | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
• | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
The remote control door lock receiver (RCDLR) receives a radio frequency (RF) transmission from each tire pressure sensor. Each sensors RF transmission contains its own unique identification (ID) code that must be learned into the RCDLR memory. Once all 4 IDs have been learned and vehicle speed is 25 mph, or greater, the RCDLR continuously compares IDs in received transmission to its learned IDs to determine if all 4 sensors are present.
The ignition is ON.
The RCDLR has not undergone the programming procedure.
The driver information center (DIC) displays the SERVICE TIRE MONITOR warning message.
A current DTC will clear when the RCDLR has undergone the setup procedure.
A newly replaced RCDLR will set DTC C0569 on its initial ignition ON cycle. Tire type and tire pressure selection setup must be performed.
Tire Pressure Monitor Description and Operation
Verify that the DTC C0569 is not set.
⇒ | If the DTC is set, program/setup the RCDLR. If the DTC resets, replace the RCDLR |
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for RCDLR replacement, setup, and programming