For 1990-2009 cars only
Diagnostic Instructions
| • | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
| • | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
| • | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
Circuit Description
The instrument panel cluster (IPC) illuminates the stability system caution indicator during the IPC bulb check or when the electronic brake control module (EBCM) sends a serial data message to the IPC commanding the indicator ON.
Reference Information
Schematic Reference
Antilock Brake System Schematics
Connector End View Reference
Description and Operation
Electrical Information Reference
Scan Tool Reference
Circuit/System Verification
Ignition ON, observe the stability system caution indicator to turn ON, then OFF during the IPC bulb test.
Circuit/System Testing
Important: Diagnose all vehicle DTCs before using this diagnostic.
- Ignition On, perform the display test with a scan tool, the stability system caution indicator should turn ON then OFF.
- Replace the EBCM.
| ⇒ | If the stability system caution indicator does not turn OFF, replace the IPC. |
Repair Instructions
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for EBCM or IPC replacement, setup, and programming
