Front Side Door Molding Replacement. Saturn OUTLOOK

For 1990-2009 cars only

Makes 🢒 Saturn 🢒 2007 🢒 OUTLOOK - FWD 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Front Side Door Molding Replacement

Callout	Component Name
1	Front Side Door Center Molding Assembly Notice: Refer to Exterior Trim Emblem Removal Notice in the Preface section. Procedure Use a J 25070 to remove the front side door molding. Peel the adhesive tape liner from the molding. Special Tools J 25070 Heat Gun - 500-750F
2	Front Side Door Retainer (Qty: 3) Procedure Align the 3 retainer clips to the holes in the door. Align the A-pillar clip first followed by the other 2 clips. Push up slightly on the molding when aligning the other 2 holes. Using a clean towel and hand pressure, wet out the entire length of the molding starting at the front edge of the front door and working rearward.

Callout

Component Name

Front Side Door Center Molding Assembly

Notice: Refer to Exterior Trim Emblem Removal Notice in the Preface section.

J 25070 Heat Gun - 500-750F

Front Side Door Retainer (Qty: 3)

Align the 3 retainer clips to the holes in the door.
Align the A-pillar clip first followed by the other 2 clips.
Push up slightly on the molding when aligning the other 2 holes.
Using a clean towel and hand pressure, wet out the entire length of the molding starting at the front edge of the front door and working rearward.