Preliminary Procedure

Using a J 25070 Heat Gun in a circular motion, warm the front side door molding prior to removal. Carefully clean the body panel thoroughly prior to bonding the new lower body side molding to the door.

1

Rear Side Door Lower Molding Locating Pin

Procedure

Align the pin to the center of the door prior to securing the retainers.

2

Lower Molding Integral Retainer (Qty: 10)

3

Rear Side Lower Door Molding

Procedure

Secure the molding to the door and remove the protective liner on the backside of the molding after all of the retainers are secure.