1

Front Seat Adjuster Switch Mounting Plate

Procedure

1. Using a non-metallic flat-bladed tool, release the retainer tabs starting at the rear edge and working forward while pulling outward on the mounting plate.
2. Disconnect the electrical connectors from the switch assemblies.

2

Front Seat Outer Recliner Finish Cover Screw (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
4 N·m (35 lb ft)

3

Front Seat Outer Recliner Finish Cover

Tip
Release the snaps from the front seat adjuster shield and the inner recliner cover while pulling outward to remove.

4

Front Seat Adjuster Shield

5

Front Seat Adjuster Shield Retainer Clip (Qty: 4)