1

Rear Wiper Arm Finish Cap

Tip
Lift up on rearward end of cap to disengage from rear wiper arm.

2

Rear Window Wiper Arm Nut

Notice: Refer to Fastener Notice in the Preface section.

Procedure

Hold the wiper arm blade to the first line of the rear defroster grid line before securing.

Tighten
10 N·m (89 lb in)

3

Rear Window Washer Nozzle Hose Assembly

Procedure

Rotate the hose counter-clockwise around the end of the rear wiper washer arm, route through the slot in the bezel at the base of the pivot shaft, and attach to the barb before installation of the wiper arm onto the pivot shaft.

4

Rear Window Wiper Arm (w/blade) Assembly

Procedure

1. Use a gentle rocking motion on the wiper arm in order to remove the arm from the wiper motor pivot shaft.
2. Clean the knurls on the rear wiper motor pivot shaft after the rear wiper arm has been removed.
3. Hold the wiper blade to the first defroster grid line to secure.