Caution: If a window is cracked but still intact, crisscross the window with
masking tape in order to reduce the risk of damage or personal injury.
Important: Before cutting out a stationary window, apply
a double layer of masking tape around the perimeter of the painted surfaces and inner
trim.
- Open the liftgate.
- Remove the liftgate trim panel. Refer to
Liftgate Trim Panel Replacement
in Body Rear End.
- Remove the rear wiper motor. Refer to
Rear Window Wiper Motor Replacement
in Wipers/Washer Systems.
- Disconnect the rear window defogger electrical connector (2).
Caution: If broken glass falls into the defroster outlets, it can be blown into
the passenger compartment and cause personal injury.
- Cover the following parts to protect from broken glass:
| 5.1. | The rear stowage compartment |
| 5.2. | The defroster outlets and A/C outlets |
| 5.3. | The seats and carpeting |
Caution: When working with any type of glass or sheet metal with exposed or rough
edges, wear approved safety glasses and gloves in order to reduce
the chance of personal injury.
Important: Keep the cutting edge of the tool against
the window.
- Separate the urethane adhesive from the window.
| • | Leave a base of urethane on the pinchweld flange. |
| • | The only suitable lubrication is clear water. |
- With the aid of an assistant, use the suction
cups in order to lift the liftgate window (3) from the opening.
