SMU - Revised Disc Brake Specifications
| Subject: | Revised Disc Brake Specifications |
| Models: | 2005 Buick Terazza |
| 2005 Chevrolet Uplander |
| 2005 Pontiac Montana SV6 |
| 2005 Saturn Relay |
This bulletin is being issued to certain Disc Brake Specifications in the Disc Brakes sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
Application | Specification | |
|---|---|---|
Metric | English | |
Front | ||
Rotor Thickness-New | 32.2 mm | 1.27 in |
Rotor Discard Thickness | 30.7 mm | 1.21 in |
Rotor Minimum Allowable Thickness After Refinish | 31.08 mm | 1.22 in |
Rear | ||
Rotor Thickness-New | 12.0 mm | 0.472 in |
Rotor Discard Thickness | 10.5 mm | 0.413 in |
Rotor Minimum Allowable Thickness After Refinish | 10.8 mm | 0.425 in |
| ||
Caliper Bolt | 34 N·m | 25 lb ft |
Caliper Bracket Bolt | 130 N·m | 96 lb ft |
Hose to Caliper Bolt | 40 N·m | 30 lb ft |
