GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1681821  Size: SH
  1. Remove the insulator panel. Refer to Knee Bolster, Insulator, Molding Replacement - Instrument Panel .
  2. Remove the connector position assurance (CPA) retainer.
  3. Disconnect the instrument panel (I/P) harness electrical connector (1) from the accelerator pedal.

  4. Object Number: 1544734  Size: SH
  5. Remove the accelerator pedal bolts.
  6. Remove the accelerator pedal (2).

Installation Procedure


    Object Number: 1544734  Size: SH
  1. Install the accelerator pedal (2).
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the accelerator pedal bolts (1).
  4. Tighten
    Tighten the bolts to 10 N·m (89 lb in).


    Object Number: 1681821  Size: SH
  5. Connect the I/P harness electrical connector (1) to the accelerator pedal.
  6. Install the CPA retainer.
  7. Install the insulator panel. Refer to Knee Bolster, Insulator, Molding Replacement - Instrument Panel .
  8. Verify the operation of the accelerator pedal.