GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

Caution: Refer to Park Brake Cable to Caliper Caution in the Preface section.

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

  2. Object Number: 732929  Size: SH
  3. Disconnect the left rear park brake cable and adjustment stud assembly from the equalizer assembly by removing the equalizer nut from the adjustment stud.

  4. Object Number: 717002  Size: SH
  5. Disconnect the front park brake cable (1) from the right rear cable (3) at the connector clip (2).

  6. Object Number: 717006  Size: SH
  7. Remove the equalizer assembly from the front park brake cable. Insert a flat-bladed tool into the equalizer and lightly twist to reposition the equalizer retaining tab. This will release the assembly from the cable.

Installation Procedure


    Object Number: 716998  Size: SH
  1. Install the equalizer assembly to the front park brake cable.

  2. Object Number: 717002  Size: SH
  3. Connect the front brake cable (1) to the right rear cable (3) at the connector clip (2).
  4. Connect the left rear brake cable and adjustment stud assembly to the equalizer assembly by installing the adjustment stud to the equalizer nut.
  5. Adjust the Park Brake System. Refer to Park Brake Adjustment .
  6. Lower the vehicle.