GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1544743  Size: SH
  1. Record all presets and theft codes from the radio.
  2. Turn off all the lamps and accessories.
  3. Turn the ignition OFF.
  4. Loosen the negative battery cable (2) nut.
  5. Remove the negative battery cable from the battery.

Installation Procedure


    Object Number: 1544743  Size: SH

    Important: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.

  1. Install the negative battery cable to the battery.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Tighten the negative battery cable (2) nut.
  4. Tighten
    Tighten the nut to 16 N·m (12 lb ft).

  5. Reprogram the radio presets. Refer to Radio Setup .
  6. Re-initialize the power sliding doors. Refer to Rear Side Door Actuator Control Module Programming and Setup .