High-beam Headlamp
Low-beam Headlamp
Sidemarker Lamp
To replace one of these bulbs:
- Open the hood. See
Hood Release
.
- Remove the headlamp retainer pin (A)
by turning it towards the headlamp assembly and pulling it straight out.
- Remove the screw (B) from the top of the headlamp assembly.
- Pull the assembly away from the vehicle.
- Disconnect the socket wiring harness connector from the headlamp assembly.
- Turn the bulb socket counterclockwise to remove from the assembly.
- To replace a headlamp bulb, disconnect the bulb socket wiring harness
and connect to the new bulb socket.
To replace a sidemarker bulb, pull
the old bulb out and push a new bulb in.
- Reinstall the bulb socket by inserting into the bulb assembly and turning
it clockwise to secure.
- Reverse steps 1 through 5 to reinstall.