GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1677915  Size: SH
  1. Remove the intake manifold cover, if necessary. Refer to Intake Manifold Cover Replacement .
  2. Disconnect the positive crankcase ventilation (PCV) fresh air tube from the air cleaner outlet duct. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Loosen the air cleaner outlet duct clamp at the mass air flow (MAF)/intake air temperature (IAT) sensor.
  4. Loosen the air cleaner outlet duct clamp at the throttle body.
  5. Remove the air cleaner outlet duct from the air cleaner housing and throttle body.

Installation Procedure


    Object Number: 1677915  Size: SH
  1. Install the air cleaner outlet duct to the air cleaner housing and throttle body.
  2. Tighten the air cleaner outlet duct clamp at the throttle body.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Tighten the air cleaner outlet duct clamp at the MAF/IAT sensor.
  5. Tighten
    Tighten the clamps to 2 N·m (18 lb in).

  6. Connect the PCV fresh air tube to the air cleaner outlet duct. Refer to Plastic Collar Quick Connect Fitting Service .
  7. Install the intake manifold cover, if necessary. Refer to Intake Manifold Cover Replacement .