GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2007 🢒 RELAY 🢒 Engine 🢒 Engine Mechanical - 3.9L 🢒 Power Steering Pump Replacement

Object Number: 1774493 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Remove the drive belt. Refer to Drive Belt Replacement .
  3. Remove the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement .
  4. Remove the power steering pump pulley. Refer to Power Steering Pump Pulley Replacement .

1

Engine Lift Bracket Bolt (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
50 N·m (37 lb ft)

2

Engine Lift Bracket

3

Power Steering Gear Inlet Pipe/Hose Fitting

Tip

    • Use an appropriate tool to remove the power steering fluid from the reservoir before removing the hoses from the pump.
    • Use a new O-ring seal for installation.

Tighten
27 N·m (20 lb ft)

4

Power Steering Pump Inlet Pipe/Hose

Tip
Compress the clamp to disconnect the inlet hose from the power steering reservoir.

5

Power Steering Pump Bolt (Qty: 3)

Tighten
30 N·m (22 lb ft)

6

Power Steering Pump

Tip
After installation, fill and bleed the power steering system. Refer to Power Steering System Bleeding .