1

Tail Lamp Screw (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Open the liftgate to gain access to the screws.

Tighten
6 N·m (53 lb in)

2

Tail Lamp Assembly (Qty: 2)

Tip

1. Pull the tail lamp rearward to disengage the 2 retainers on the back side of the tail lamp.
2. Disconnect the electrical connector.
3. Remove and replace the bulbs, if necessary.
4. Remove and replace the tail lamp wiring harness, if necessary.