GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the front floor console reinforcement. Refer to Front Floor Console Bracket Assembly Replacement .

  2. Object Number: 1538732  Size: SH
  3. Disconnect the electrical connector (3) from the yaw rate sensor.
  4. Remove the nuts (2) retaining the yaw rate sensor.
  5. Remove the yaw rate sensor (1) from the console bracket.

Installation Procedure


    Object Number: 1538732  Size: SH
  1. Install the yaw rate sensor (1) to the console bracket.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the nuts (2) retaining the yaw rate sensor.
  4. Tighten
    Tighten the nuts to 9 N·m (80 lb in).

  5. Connect the electrical connector (3) to the yaw rate sensor.
  6. Install the front floor console reinforcement. Refer to Front Floor Console Bracket Assembly Replacement .