Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the drivers side instrument panel (I/P) insulator. Refer to Knee Bolster, Insulator, Molding Replacement - Instrument Panel in Instrument Panel, Gages, and Console.

1

Screws, Body Control Module (Qty: 4)

Tighten
2 N·m (18 lb ft)

2

Module Assembly, Body Control

Tip

1. Disconnect the electrical connectors.
2. Reprogram the body control module. Refer to Control Module References for programming and setup information.