Radiator Outlet Hose Replacement LZ9

Radiator Outlet Hose Replacement LX9

Tools Required

SA9111E Hose Clamp Pliers

Important: Use the SA9111E to gently release tension on the hose clamp until the hose clamp lock feature engages allowing removal of the hose.

1. Drain the cooling system. Refer to Cooling System Draining and Filling.
2. Using the SA9111E , release tension on the hose clamp at the water pump until the clamp locks.
3. Remove the radiator outlet hose from the water pump.
4. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls - 3.5 L.



5. Using the SA9111E , release tension on the hose clamp at the radiator until the clamp locks.
6. Disconnect the radiator outlet hose retainer from the cooling fan shroud.
7. Remove the radiator outlet hose from the radiator.

Important: Release the hose clamp retention lock by using a small flat bladed screwdriver.

1. Install the radiator outlet hose to the radiator.
2. Using a small flat-bladed screwdriver, release the hose clamp retention lock at the radiator.
3. Connect the radiator outlet hose retainer to the cooling fan shroud.



4. Install the radiator outlet hose to the water pump.
5. Using a small flat-bladed screwdriver, release the hose clamp retention lock at the water pump.
6. Fill the cooling system. Refer to Cooling System Draining and Filling.
7. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls -- 3.5 L.